At the end of the follow-up, PD was
2.86 mm, percentile of surface with BOP was 23.5, and PI was 0.45. Conclusion: The CAD/CAM AP24534 order titanium-ceramic FPDs survived in the mouths of patients without major complications for 3 years, although the risk of porcelain fracture appeared to be relatively high. “
“The purpose of this study was to determine whether the ringless casting and accelerated wax-elimination techniques can be combined to offer a cost-effective, clinically acceptable, and time-saving alternative for fabricating single unit castings in fixed prosthodontics. Sixty standardized wax copings were fabricated on a type IV stone replica of a stainless steel die. The wax patterns were divided into four groups. The first group was cast using the ringless investment technique and conventional wax-elimination method; the second group was cast using the ringless investment technique and accelerated wax-elimination method; the third group was cast using the conventional metal ring investment technique and conventional wax-elimination method; the fourth
group was cast using the metal ring investment technique and accelerated wax-elimination method. The vertical marginal gap was measured at four sites per specimen, using a digital optical microscope at 100× magnification. The results were analyzed using two-way ANOVA to determine statistical significance. The vertical marginal gaps of castings fabricated using the ringless technique (76.98 ± 7.59 μm) were significantly less (p < 0.05) than those castings fabricated using the conventional metal ring technique (138.44 ± 28.59 μm); RO4929097 clinical trial however, the vertical marginal Nintedanib mw gaps of the conventional (102.63 ± 36.12 μm) and accelerated wax-elimination (112.79 ± 38.34 μm) castings were not statistically significant (p > 0.05). The ringless investment technique can produce castings with higher accuracy and can be favorably combined with the accelerated wax-elimination method as a vital alternative
to the time-consuming conventional technique of casting restorations in fixed prosthodontics. “
“Dentists have used rapid prototyping (RP) techniques in the fields of oral maxillofacial surgery simulation and implantology. With new research emerging for molding materials and the forming process of RP techniques, this method is becoming more attractive in dental prosthesis fabrication; however, few researchers have published material on the RP technology of prosthesis pattern fabrication. This article reviews and discusses the application of RP techniques for prosthodontics including: (1) fabrication of wax pattern for the dental prosthesis, (2) dental (facial) prosthesis mold (shell) fabrication, (3) dental metal prosthesis fabrication, and (4) zirconia prosthesis fabrication. Many people could benefit from this new technology through various forms of dental prosthesis production. Traditional prosthodontic practices could also be changed by RP techniques in the near future.